Wet or dry, keep your slots well protected
The Bolting Bible
The Book of Canyoning
Welcome to our free course as our way of contributing to the bolting community. It's nice to understand what you are clipping and trusting with your life, even if you never plan on installing or removing bolts. Also, if someone is going to spend their time and money to bolt something, I assume, they probably want to do it as good as possible. Hopefully, the Bolting Bible gives you the tools you need to do a great job. Get it?
Our courses are A-Z content in blog format, glued together with an overarching blog we call a textbook. A blog format is easy to read, easy to update, and easy to translate. Be sure to begin at the TEXTBOOK and at the end of each episode we'll point you to the next.
A huge thanks to Brent Roth & Adolfo Isassi for contributing so much information to this section
Is Bolting Allowed?
Bolting in wilderness areas falls in a gray area currently and legislation is trying to include bolts in the definition of "installations," which currently are things like buildings, fences, and pipelines which are illegal to have in wilderness areas. Different areas have different rules, so just make sure you can legally-ish install a bolt before you do it.
Should YOU Bolt That Canyon?
Do you know what you are doing? Have you practiced in your backyard (more than 3x) or gone with people who know what they are doing?
Are you from the area and will be a steward of maintaining those bolts? There are micro-communities and micro-cultures around every groove in the earth.
Learn who is who and what they think AND WHY they think what they think to holistically make bolting decisions. Sometimes supporting the people doing the work already is going to achieve better results. Sometimes people have good intentions and want to control everything and everyone but nothing happens, so you just have to do your own thing, but do it with as little ego as you can, with as much information as you can learn, and think as big picture as possible before changing stuff that has been around for a gazillion years and everyone wants to enjoy.
To Bolt or NOT To Bolt
Cool. It's legal, and it won't piss off too many people, and will help the community at large. Now let's make sure we stop long enough to ask, does it need bolting? Assuming people want to descend a canyon what are the options?
Ghosting by Adolfo Isassi
It is great if you can rappel and leave nothing behind. Not every place has something you can wrap your rope around like a tree or boulder but if that's an option, should everyone just “ghost”?
Retrievable Rigging and Retrievable Anchors, together known as “ghosting” have become a point of pride in some SW canyoneering circles. These are great techniques for explorations, first descents, and low visitation routes, in areas where natural anchor opportunities are scant. But their level of risk and required training is just not scalable for high visitation.
For a remote location, an A/B rated route getting descended a handful of times a year, with canyon sections where there are only slick walls and sand, probably yes, ghosting is still the right answer.
As a route gets popular and gets more traffic, the intended “Leave No Trace” principle behind ghosting techniques starts to lose its effect. With enough traffic, even ghosting techniques start to leave traces. There are some spots that get grooves in the sandstone from rappelling with sandbags and pulling the rope down that might benefit from having bolts a bit higher up that reduce the scarring on the rock.
These popular routes might start to deserve a few carefully placed bolts with low environmental impact in mind, and offering safer visit for people without ghosting skills.
Consider “ghosting” as a micro-community and micro-culture that deserves consideration when making bolting decisions. You should weigh this consideration against the lowest possible Environmental Impact and Safety for the current levels of visitation. Which in turn, requires that you are very familiar with the dynamics of the area.
This isn't pro ghost or pro bolt, but just considerations you need to look at before bolting.
Natural Anchors
If there is a tree, why not just put some webbing and rappel rings on it? There is totally a time a place for that but it looks pretty manky after just a season or two, people get sketched by it so they add webbing and starts to look unsightly. And if debris from a running canyon gets caught in it, that's just creating more plastic trash in the beautiful places we are trying to play in. And is micro plastic in our waterway's an issue? Are two stainless unlinked bolts that could last for many many years less impact than a clump of webbing?
First Descent vs Trade-Route Canyons
The first descent of a canyon can be a tremendous amount of work often done by a few people. Not only is it a lot of weight to carry, the cost of hardware, tools and equipment can be a burden as well. Some do it for glory, some to scratch the itch of exploration, some want build something great for a community. Whatever the reason, respect is owed to the first descent team. The first descent of a canyon may not be the best descent that could be made. Bolts may be only placed as needed and the best location may not be identified until the canyon is run a few times. Some canyons may not be worth going back to. The first canyon descent does not include a bolting plan. This is where experience and the local canyon community comes in. How much will this canyon be run? Who will be running it? Who is responsible for rescue options? Should there be a standard anchoring system for easier maintenance? These are questions that should be considered when a canyon becomes a "trade route" and should include a bolting plan.
Tools - More Than Just The Drill Bit Tips
In the wet type C canyons, you'll need dry bags for the drills and batteries and tethers on most of the tools as you may not be able to yard sale next to the area you plan on bolting. A drill sized rain jacket is also important to protect it from splashing.
Keeping drill bits cool by squirting water on them as you go is a luxury as most other sports don't have an infinite water supply next to them. Bring a squeeze bottle to not only keep the drill bit cool but also to clean the hole out. WARNING: Don't drill an entire hole dry and then dip your bit in water. Rapid cooling can make your carbide tip literally detach from the bit. Just keep it cool the entire time and you'll be super good enough.
Metal - Make it last a long time
Stainless! If you get nothing else from reading the bolting bible, please use stainless steel. Zinc-plated bolts corrode, especially in wet environments. It last longer in deserts but not forever and just because it's hot when you install it, doesn't mean that the annual moisture that bolt sees is 0. Plan for 200 years, not 20. Don't go cheap today and create a ton of work and cost down the road.
Is Water Bad for a Bolt?
Read the chapters about INSTALLING GLUE INS and INSTALLING MECHANICAL BOLTS as all that applies here. Don't worry about the water. Stainless can handle being in fresh water and you don't have to worry about water getting into the hole. You can install glue ins or mechanical bolts while the hole is wet, just keep in mind that glue can take twice as long to cure. Clean the hole well and you are good to go like normal.
Bolt Type - Think About Maintenance
Mechanical bolts are great when they are great. Hard and solid rock doesn't need glue ins and mechanical bolts are half the work to install and require half the tools. Glue ins eyes can have ropes run through them unlike sharp hangers minimizing the need for more stuff (rappel rings) risking getting caught in debris, but if they get smashed by the debris, they are much harder to maintain/replace in an ever changing environment. There are several hangers that could allow for ropes to be directly threaded into them but having rappel rings allow for multiple clip in points.
The best bolt to use in an area that could be damaged by debris is one that is easy to replace. Wedge bolts are some of the cheapest options but if those threads get smashed, you can't get a bolt remover on it. Petzl Coeur Pulse bolts are not intended for this purpose and are not recommended for canyons. Fixe Triplex are removable and some of the easier bolts to maintain. Concrete Screws are probably the easiest to remove but the hole can't be reused more than a few times.
Let's talk about other holes... assholes. There are people who like to damage bolts for a variety of reasons that is covered in the Book of Ethics chapter. You could try to install something more permanent and bomber if your hangers keep getting stolen but 10 seconds with a hammer and a bad attitude can lay them over and render them useless, making it really hard to reinstall another one with an unsightly nightmare. You can also swing the other way and make it really incredibly easy to remove like concrete screws so it's just a matter of putting a new bolt when you show back up. If it's a constant problem, then you have to get into concealing anchors which is not part of this chapter.
Mr (or Mrs) Fix It
If a bolt gets damaged here are some ways to deal with it.
Don't do anything if you don't know how, post online that it needs to be changed or tell someone who does know how to bolt.
Just replace the hanger
Pull out the bolt and install a new one
Cut the bolt off and patch that spot and install a new one
Location
You need to be able to pull your rope down after rappelling so try to have the anchor the most in line as possible and not 30 feet back over an edge. Being that there are often groups of people traveling down a canyon, try to make the location people will be getting on rappel or managing the anchor, somewhere they can stand or get to safely. If they can't get to the bolts without a great risk of falling off a cliff, you may have to put intermediate anchors in.
In wet canyons, water levels change A LOT and if you are in a high flow, your anchors might literally be under the water and if the water is really low, you may not be able to reach the anchors installed during a high flow. Good luck!
In wet canyons, try to place bolts where heavier flows won't hit the bolts, The faces of a rock, not the top, is a good start or under an overhang is even better. Just don't make it too hard for other people to find or they will just place more.
Bolt Configurations
In canyons that never see water, you can have two bolts configured however you want and they are typically spaced about 12" apart. They can have chain connecting both of them into a single quicklink. However, if you do this in a wet canyon, it can catch debris and rip the anchor out.
The abridged version of using unlinked bolts is feed the rope through both rings/quicklinks and block a knot or descender up against one of them. If people don't know how to set up their rappels on these, will link the two bolts with a piece of webbing and a quicklink that they leave behind. If you come across unlinked bolts, DO NOT LINK them. It could rip out the anchor later. You can see the different ways of rigging rappels on them including pre-built-in rescue systems in our CANYON ROPES COURSE.
IF you can get away with a linked system, do this.....
The Numbers
Here are some of the forces your bolts will see. Gear is rated in kilonewtons, and for our examples below a person is 1kN or 225lbs/102kg.
Your bolts are rated to at least 20kN if not 60kN and there are usually two
Rappelling straight off the bolts and not moving gets 1kN
Rappelling in a jerky manner doing tiny shock loads to the anchor gets 2kN
If you rig off two bolts in a stone knot. One bolt has the knot smashed up against it and that will see 1kN and the other bolt that has a 90 degree angle redirecting the rope down will see 1.4kN.
If you have a V shaped equalized anchor, each bolt is seeing half or 0.5kN
If your anchor is over an edge at 30 degrees, the friction reduces the force down on the anchor to .75kN
If your anchor is flat on the ground and you have it going over the edge at 90 degrees, the friction reduces the force down to 0.5kN
If you are being counterweighted by your partner and they lower you while you rappel, the anchor sees both your weights or 2kN
If you rig a guided rappel assuming a 45-degree angle, the top anchor sees 4kN and the bottom anchor sees 3kN, and if you need to go out and rescue them double those forces
If you do the same thing but your anchors are level, you will get 4kN on both. Never tension something like that with a toothed device! The bolts are fine though.
Put in good bolts and it is super good enough. Don't drown!
They're Gone!?!? by Adolfo Isassi
Recently someone came across a set of removed bolts. Luckily, they were able to sort the situation out and exit the canyon safely. Sadly, if you canyoneer long enough in the American Southwest, you are bound to find chopped, cut, removed or otherwise disappearing bolts from rappel stations. Sometimes they are just crudely cut/chopped, sometimes they are painstakingly removed and the holes beautifully filled-in and patched with matching sand color and epoxy. But no matter how hacky or artfully done, now, you may be stranded in the middle of a canyon.
Through the years I've learned that there is nothing that people can do or say to stop this.
The state of the sport is such that bolts are installed under the cover of anonymity, and also removed under the cover of anonymity. If you are wise, you will learn to carry tools and skills to deal with these situations. Extra webbing, extra rapides, a toggle-stick, maybe even some sand bags, and the knowledge on how to use these tools and construct dead-man and cairn anchors.
In a twisted way, that is what bolt-choppers want: For you to canyoneer flintstone like. They fetichize and glorify these tools and methods. These tools and methods are exploration and first-descent tools. They are great for that, and for remote canyons that are visited a handful of times per year. I have them, and use them. You will be surprised to learn that some of the same people who have chopped bolts... have placed bolts themselves. So, it is not so much that there should be absolutely no bolts, but that they get to decide which canyons are bolted, and which ones are not.
Through the years, I've been trying to understand this arbitrary behavior. I've come across several justifications. The first one can be described as a diatribe of "First Descent Ethics". Kind of the same concept in rock-climbing of sending a first ascent: All following rock climbers should follow the route and mimic moves done by the first ascender. Regardless of how much stock you put into this contrived notion of ethics, you will also be surprised to learn that "first descent ethics" subscribers have removed pitons in canyons placed by first-descenders. So much for respecting first-decent-style. So we are back to square one on what they mean is that they get to decide what ethics are acceptable.
The next justification from bolt choppers explaining their motivations, is that you should canyoneer and "Leave No Trace" (LNT). But this does not cover or explain webbing on natural anchors, or rope grooves by pulling rope from deadmans, cairns or pulling sandtraps.
With enough human traffic, canyoneers will damage rock even with some of these flintstone practices. There is a slim set of tools that fulfill the LNT goal, but coupled with the canyoneering ethos of self-learning, and trial by error, it is a worrisome prescription as a standard canyoneering practice.
When a canyon gets publicized enough, and gets high visitation, the most LNT thing canyoneering can do is to install bolts that protect and minimize traffic impact. But this needs to be done by people with experience and know-how. Bolting has been such a taboo subject in the SW, that bolting know-how, and bolt proper location is on arrested development. There are instances of bolt removal due to bad installations and/or poor locations. So learning how and where to bolt while in a canyon is NOT the answer.
SO, WHAT TO DO?
If you frequent canyons that you know are bolted, next time you go through them, ask yourself at every rap station: What would I do if there are no bolts?
Hone your natural anchoring skills
Alert community members by posting a trip report where the canyon's public beta resides
Document stations and removals with your camera
AND, WHAT NOT TO DO:
Do not grab a bolting kit to learn how to bolt by trial and error in a canyon
Do not engage in behaviors that will result in canyon closures. For land managers, it is easier to close canyons than sort out community conflicts and disagreements.
Take this aspect of the sport, as....growing pains.
10% Supports HowNOT2
Climbing, Caving and Canyon Gear
& Over 30 Bolting Products
HowNOT2 Contribute
If you see a typo, or see a resource online we haven't linked to, or have something to share, we'd love to add it. If you are contributing a video, image, or words, please be kind by delivering something ready to add and tell us where you think it best fits.
The End!
Please share this with someone who trusts their life to bolts.
This course is free but not free to make. If it really helped you, please consider SUPPORTING US.